Date: 2025/02/14
This update content includes:
Add *269#O3,6,Y GSM jump alarm control OUT3
1.X=6, Y=continuous output time, in seconds
*269#O3,6,20
Within 20 seconds after detecting GSM jump, the intermittent output (2s ON, 1s OFF) lasts for 20 seconds, and then the output is turned off. After turning off Out3, Out1 immediately controls the output to cut off fuel and electricity until the GSM jump ends or waits for the customer to send command to restore fuel and electricity before turning off the output
② If GSM jump is restored within 20 seconds, turn off Out3 output and do not execute Out1
③ If GSM jump is still detected after 20 seconds of execution, OUT1 will immediately control the engine to shut down until the GSM jump ends or wait for the customer to send a command to restore fuel and electricity before turning off the output
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article